ITTSB.EU Blog Forum
Components Testers: LCR Meter | Function generators | Programmable DC Electronic Load => Handheld LCR Meter => Topic started by: Kiriakos GR on February 11, 2025, 06:59:21 PM
-
HIOKI wrote at 2018, their Impedance Measurement Handbook
36 pages with measuring tips, along How to so the users to make their own cables for four wires measurements.
Its very interesting that they are different suggestions, for cable harness for LCR meter, and or cable harness for measuring with precision Low value resistors.
https://www.hioki.com/download/33084 (https://www.hioki.com/download/33084)
The above information, it might appear especially useful at any owner of such HIOKI products ( LCR and Resistor meter ).
Because when the cables they do conform electrically according to HIOKI (factory advice), they are more chances any DIY cable hardness, to better perform at test clips zero test, along at the entire measurement range of its instrument.
The download is available only to registered members at HIOKI website.
------------------------------------------------------------------------
Here are some topics that we covered in this handbook:
🟢 Making high-precision measurements
🟢 Precautions when fabricating your own measurement cables and other components
🟢 FAQs ;
-1. How should I choose....
a. measurement frequency?
b. measurement signal level?
c. measurement range?
-2. Is it possible to measure a grounded DUT?
-3. Are AC impedance and DC resistance measured at the same time?
-4. etc .......
🟢 Troubleshooting:
-1. Measured value instability and variability
-2. Inability to perform open and short compensation
-3. Strange measured values