!!

Welcome to our Forum, extension and content sharing platform of Electrical Test and Measurement Product Reviews Blog.

 
Registration this is Free, we accept contributors of 17 years old and above. We do not accept registration with Gmail

Active since 7 June 2012  


Copyright Notice: Entire ITTSB.EU content & images they are copyright protected. - Forum search engine disabled to Guests - No need of you using Adblock software.

Author Topic: GW Instek GDS-300 / GDS-200 portable DMM + Oscilloscope (Discontinued)  (Read 2389 times)

0 Members and 2 Guests are viewing this topic.

Online Kiriakos GR

  • Administrator
  • Hero Member
  • *****
  • Join Date: May 2012
  • Location: Greece
  • Posts: 2316
  • Country: gr
    • ittsb.eu
  • job title: Industrial Maintenance Electrician
Somewhere at the end 0f the year 2023 and or beginning of 2024?   
GW Instek it did bite the bullet and discontinued the entire GDS-300 / GDS-200 portable DMM + Oscilloscope series.

First December of 2014, ITTSB Blog accepted two samples from GW Instek, the GDS-320 along of their GDP-040D differential Probe Option for a product review.
The product seemed to deliver a good level of overall satisfaction with only two reasons causing dissatisfaction.
https://www.ittsb.eu/GDS-320-Oscilloscope-Review.html

Touchscreen was not that helpful at setting precise trigger point at oscilloscope mode = nowhere to compete with oscilloscope with dedicated trigger knob.
At DMM mode, thermometer function, the compensation for the K-type thermocouple this should be set manually = increased time so to setup the instrument.       

After three years of time, it become obvious and a third problem, and this is no other than battery life.
The aged lithium battery this started to inflate and lose it capacity.

GW Instek did the major mistake to install the battery internally over a special plate next to electronics PCB, and only them their own service center, this would be able to replace it.
Long story in short, the owner of that product he should accept constantly paying every three ~ four years the price of approximately 100 Euros to GW Instek, for a new installed battery.

Nowadays GW Instek discontinued the product, and they did use a single word, with out to explain for how long time they feel obligated, them to deliver a spare battery pack.
Either way, GW Instek this now lost from their portfolio their battery powered Oscilloscope + DMM. (And neither they mention any NEW product series as replacement for it.)

Additionally in the race for medium priced 12 Bit oscilloscope, GW Instek this has nothing available in the past two years, while their competitors from China they are now several steps ahead.

https://www.gwinstek.com/en-global/products/layer/Discontinued_Products/Discontinued_Oscilloscope
WWW.ITTSB.EU   Industrial Test Tools Scoreboard  (Product Reviews Blog) / Editor in Chief.
The content of this Web site is copyright protected

 

ITTSB.EU Blog

General Data Protection Regulation GDPR ITTSB.EU Home Page Reward us by a Donation - Sponsorship TsDMMViewer Data Logger for FLUKE 884xA

ITTSB Blog - Sponsors

protosnet.com - Internet solutions FLUKE benchtop DMM Repair Services

Recommended Links

Hellenic Accreditation System E.SY.D. Portal of city Volos - Greece Clean Up and Customize Facebook Firefox Backup Tool 32bit / 64 bit Winaero Tweaker = Win7 Fonts size fix